Snowmobiling season is a lot of fun, and it’s one of the most exciting times of year for people who are fans of either motorized two-wheeled vehicles or four-wheeled machines that can drag people around through knee-deep powder. Many people have been purchasing snowmobiles as a hobby or because they have a passion for them. There are many types of snowmobile parts in the market today with all kinds of accessories; one of them is the battery.
Many snowmobiles batteries tend to lose their power after some time; finding alternative ways to make them work is the best. If you can’t take care of your snowmobile battery, it won’t last very long. Read to learn the 9 tips to help your snowmobiling battery last longer to enjoy the winter months even more often!
Keep The Battery Clean
The worst things for a battery are dirt and dust. It makes it harder for the battery to get power from its surroundings, and it can also damage some of its internal components. For your battery to last as long as possible, ensure the terminals are clean because a corroded battery can make the snowmobile not start. Any battery can be corroded and hence becomes a poor conductor of electricity. It’s necessary to keep dirt out of the contact points where electricity flows!
Keep It Warm
Cold weather affects battery life. If your battery is too cold, it won’t be able to hold a charge as well as it should. The best place for your battery is inside your house or garage, where it will be kept warm and safe from damage caused by cold weather conditions outside. You can also use blankets or towels around the battery compartment area so that heat doesn’t escape when you go out on your next adventure!
Keep The Battery Fully Charged
To achieve this, use an automatic battery charger. The charger prevents overcharging and has alligator clips and a quickly-connect adapter. After every journey, connect them quickly. It ensures your battery is ultimately charged. Use a battery maintainer; they don’t cost much, and they’ll help you avoid damage during the off-season and let you enjoy.
Use Quality Engine Oil
Inexpensive oil may save you some money when it comes to the initial purchase, but it can cost you more later. Many lower-priced engine oils don’t contain additives that keep your engine running cleanly and smoothly. Instead of just replacing the oil after a few hours of use, you’ll also have to get into your engine and clean residue from the combustion system.
It is time-consuming, but it’s also expensive; the labor alone can cost hundreds of dollars. Use oil that the manufacturer has recommended. It is best not to use a motorcycle or outboard oil in cold weather because they aren’t designed.
Change Oil Regularly
It’s not enough to use high-quality oil in your snowmobile. You have to change it regularly, too. Changing motor oil is to remove contaminants that build up over time, so if you don’t change it regularly, those contaminants will build up and damage your engine.
Check with your manufacturer to determine how often they recommend changing your snowmobile’s oil. Every 100 hours is usually a good guideline, but if you travel in dusty conditions or a lot of time idling, you may need to change your oil more often.
Improve Hauling Technique
Hauling is a big part of how you take care of your snowmobile, and since your snowmobile has more to do with getting around than anything else, it’s pretty essential to make sure you do it right. You need to try to up your hauling game.
Wrap the machines with quality covers; this protects them. You can use a bed sheet to protect the clutch components from dirt. An enclosed trailer is the surest way to keep road dirt away.
Protect The Sled In Off-Season
Besides adding a fuel stabilizer, preparing the engine for storage involves fogging, greasing the zerks, lifting the track, and unhooking the springs.
Also, elevate your skis if you can to extend the spring’s life. As a result of sitting outside in the elements, a snowmobile will develop faded, rusted components and damage plastic and vinyl. Keeping the sled covered will protect the surfaces. Store it indoors in a dry and clean environment.
One great way to ensure your battery isn’t corroding is to make sure it’s always covered. The last thing you desire is for the weather (or even just the elements) to corrode your battery over time. WD-40 or a similar product can be sprayed on the front and rear suspension, including the shocks, as part of your long-term storage preparation.
Be sure the rust inhibitor doesn’t contact the belt and clutches. Otherwise, they’ll slip. Spray the metal parts there, but ensure the rust inhibitor doesn’t reach the belt and clutches. It will help keep the battery from corroding and ensure nothing ever gets stuck in there in the first place.
Break-In The New Sled
The proper break-in is the single most significant factor that extends the life of your snowmobile, especially the engine. Fuel for two-stroke engines in most sleds should be pre-mixed before filling the tank, though ratios can vary depending on the manufacturer.
After rebuilding, it is important to add oil to your first fuel tank. Break-in your engine by using the entire throttle range, and never hold the engine in one position. When exposing the piston rings to diverse cylinder pressures, the piston rings will be seated appropriately.
Batteries are an essential part of your snowmobile. They are the link between the power of the sled and you, the driver. Maintaining them is not complicated; keeping your battery maintained is one of the best tips. Keeping to this will help ensure that your battery will keep you moving for a long time. If you’re stuck on your next winter adventure, contact us at https://straightlineperformance.com/ and let us recommend the best snowmobile parts.
15250 Hornsby St. Forest Lake Minnesota 55025,