STRAIGHTLINE: Dyno Services

STRAIGHTLINE IS THE ONLY CERTIFIED SNOWMOBILE, ATV, AND MOTORCYCLE CERTIFIED DYNOJET POWER COMMANDER TUNING CENTER

Dynamometer Overviews

MOTORCYCLE/ATV/CART DYNO - DYNOJET 250IX

This state of the art dyno offers advanced diagnostics on a wide variety of vehicles, including motorcycles, ATV’s, Carts and many other wheel powered vehicles. The dyno can measure from as little as 1 horsepower to 750+, safely, consistently, and reliably in the shop under ideal load conditions. The dyno’s data acquisition is equipped with real-time torque module/meter, real-time O2, and eddy current load control. Using the real-time torque and air-fuel, Straightline’s dyno facility is one of the only facilities able to simulate the best “seat-of-the-pants” road testing right in the shop, many drivability/run problems can be diagnosed in a fraction of the time.

Img 0841
Olympus Digital Camera

SNOWMOBILE CHASSIS DYNO - DYNOJET 360

Using the same technologies as the other Dynojet dyno’s, Straightline snowmobile chassis dyno can accurately test all driveline, from building the perfect clutch kit to drivability issues as any speed. This is the dyno for any snowmobile that already has the bolt-on’s ready and needs to be tuned. The Dynojet 360 will accurately test gearing, clutching, belts, jetting, acceleration, and peak track horsepower.

ENGINE DYNO - HUFF TECHNOLOGIES 325

Straightline Performance’s engine dyno is one of the most accurate dynameters on the market with less than 1% inaccuracy. Capable of horsepower of over 500 at the crankshaft. This is the same dyno used by many of the OEMs for engine and durability testing. The engine dyno uses a drive on and off 5000lb hydraulic lift to support your machine up to the dyno. No need to pull the engine, at Straightline we can dyno in chassis or out. Data Acquisition is second to none with horsepower, torque, two O2s, 4 ECTs, BSFC, water in and water out monitoring and a fully controlled water supply.

Img 0387
Dscn0520

Dyno Pricing

We offer Dyno tuning by the hour. Most mapping can be done in four hours or less but varies based on the number of tuning variables and how the vehicle responds to tuning changes. Additional labor cost may be incurred if parts installation is required.

Graphs will be printed for a before and after comparison.

20131107 080539

ENGINE DYNO –

$1250.00 full day

SNOWMOBILE CHASSIS DYNO –

$800.00 full day

WHEEL DYNO –

$250.00/half day with air fuel full throttle mapping

$600.00 with full 3-dimensional maps

$100.00 3 pulls and complete print out of machine

FULL 3 DIMENSIONAL MAPPING –

Call for pricing min $400

MISC EXHAUST COMPONENTS

135-100 Complete 02 Bung and Plug Assembly/Stainless $19.95
135-101 Weld in 02 Bung Only / Stainless $9.95
135-102 Carbon Fiber Muffler Rebuild Kit (includes new tube) $129.95
135-103 02 Plug Only $9.95
135-106 Carbon Fiber Muffler Rebuild Kit (no carbon tube) $69.95
435-103 Spring clip Weld-On U-Shaped $2.99
435-104 Spring clip Weld-On W-Shaped $4.99
435-105 Spring Clip Bolt on 2-Hole $2.99

MISC EXHAUST COMPONENTS

Head Mill

1 Cylinder $35.00
2 Cylinder $65.00
3 Cylinder $90.00

 

Deck Cylinder

1 Cylinder $30.00
2 Cylinder $60.00
3 Cylinder $90.00

Welding Services Available

Pipe Repair $50-125 per pipe
Weld in EGT Bungs  $10.00 each
EGT Weld-on-fitting $19.95
Convert Steel and Pipes to Grapboil  
Style ZX Chassis Pipe $100.00
Custom Chassis Welding Quote Per Job
Complete Hand Built Pipes Quote Per Job
Custom Mufflers Quote Per Job

Straightline Performance’s weld shop can custom build any exhaust; For 2 or 4 stroke engines. 

Porting

Matching Porting to New Sleeve $50.00
Trail Port/Per Cylinder $250.00
Race Port/Per Cylinder $19.95
Polish All Port $45.00
Blueprint Cylinder (each) $200.00
Trail Port Case Twin Cylinder $250.00
Trail Port Case Triple Cylinder $350.00
Race Port Case Twin Cylinder $350.00
Race Port Case Triple Cylinder $450.00

Nikasil Plating

Per Cylinder $225.00

Private Labeling of Your Own Products!

Own a Performance Shop or Race Team but having troubles finding a certain Part or looking for a better deal? We have the ability to design and manufacture several powersports products. From clutch kits, Turbo components to bolt on accessories we can make it happen, give us a call to learn more 651-466-0212 or contact us.